EasyManua.ls Logo

Bosch FPP-RNAC-8A-4C User Manual

Bosch FPP-RNAC-8A-4C
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FPP-RNAC-8A-4C
EN
Operation and Installation Guide
Remote NAC Power
Supply

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Bosch FPP-RNAC-8A-4C and is the answer not in the manual?

Bosch FPP-RNAC-8A-4C Specifications

General IconGeneral
BrandBosch
ModelFPP-RNAC-8A-4C
CategoryPower Supply
LanguageEnglish

Summary

2.0 Installing the FPP-RNAC-8A-4C

FPP-RNAC-8A-4C Board Installation

Instructions for mounting the FPP-RNAC-8A-4C board into the enclosure.

Enclosure Installation

Steps for mounting the enclosure to a surface and preparing wire entrances.

3.0 Wiring the FPP-RNAC-8A-4C

AC Power Connections

Guides on connecting AC power, including voltage selection and ferrite core installation.

Battery Connections

Details on connecting 24 VDC backup batteries, inside and external cases.

4.0 DIP Switch and Option Bus Settings

Switch S1

Sets output pattern/protocol and NAC/power supply mode for each output.

Switch S2

Sets NAC output control, AC failure delay, and option bus address.

Related product manuals