Need help?Do you have a question about the Bosch MIC Series and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Cooling | Convection |
| Input Voltage | 100-240 VAC |
| Protection | Overload, Overvoltage, Short Circuit |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | CE, UL, RoHS |
Crucial guidelines for safe operation and handling of the power supply unit.
Detailed safety warnings and risk levels (DANGER, WARNING, CAUTION) for product use.
Essential information regarding product handling, grounding, and regulatory compliance.
Contact information and procedures for technical support and product servicing.
Lists all components and items included with the MIC Series power supply unit.
Instructions for initial preparation and configuration of the power supply unit before installation.
Guidelines for physically mounting and securing the power supply unit to its intended location.
Details the environmental protection rating (IP65) of the power supply enclosure.
Step-by-step guide for correctly connecting the shielded composite cable to the unit.
Explains the function and configuration of the PCB earth link for different earthing schemes.
Illustrates the PCB layout and details the various head-end connections for non-IR models.
Specifies the correct fuse types and ratings required for protecting the power supply unit.
Comprehensive instructions for the physical installation of the non-IR power supply unit.
Overview of optional accessories and conversion cards available for non-IR MIC cameras.
Steps for enabling and connecting public address speaker functionality with the camera.
Guides on enabling and configuring the heater option for MIC cameras.
Explains the PCB earth link for IR power supplies and its configuration for earthing schemes.
Details the specific fuse types and ratings for the MIC IR power supply units.
Shows the PCB layout and head-end connections for the MIC IR power supply models.
Step-by-step instructions for the physical installation of the MIC IR power supply unit.
Procedures for setting up and enabling the IR lamps on MIC IR cameras.
Visual representation of the power supply unit's physical dimensions and measurements.
To Next Page
