Need help?Do you have a question about the Bosch MIC-7502-Z30B and is the answer not in the manual?
General| Resolution | 1920 x 1080 (Full HD) |
|---|---|
| Sensor Resolution | 2 MP |
| Optical Zoom | 30x |
| Ingress Protection | IP66 |
| Housing Material | Aluminum |
| Video Compression | H.264, H.265 |
| Low Light Performance | 0.01 Lux (B/W) |
| Power Supply | 12 V DC |
| Operating Temperature | -40 °C to +60 °C |
| Camera Type | PTZ |
Explains manual compilation, verification, copyright, and trademarks.
Defines symbols (Danger, Warning, Caution, Notice) for safety situations.
Instructions for safe installation, electric shock reduction, and wiring.
Details China ROHS hazardous substance table and other important notices.
Covers accessory use, control adjustments, ESD, fuse rating, and grounding.
Advises on installation near hazards, damage requiring service, and no user-serviceable parts.
Informs about Class A status and provides FCC/ICES compliance details.
Provides contact details for Bosch service centers for support and repairs.
Instructions for carefully unpacking the equipment and verifying contents.
Lists additional tools needed for installation not supplied by Bosch.
Details the advanced PTZ surveillance platform's features and capabilities.
Identifies optional accessories available for MIC cameras and their descriptions.
Overview including electric shock hazards and NEMA rating considerations.
Steps for connecting and configuring the camera while it remains in the shipping box.
Guidance for configuring the camera on a temporary table-top stand before final mounting.
Covers selecting locations, orientations, lightning protection, and damp environment notes.
Details various mounting brackets, adapters, and accessories for different installations.
Illustrates corner and direct surface mount configurations for the camera.
Step-by-step instructions for adjusting the camera's angle for a desired field of view.
Explains network-based PTZ control and image transmission over IP.
Describes available power sources like High PoE midspans and 24 VAC supplies.
Details cable types, distances, and routing for Ethernet connections.
Step-by-step guide for connecting the camera to the IP network and power.
Illustrates a typical IP setup with a High PoE midspan and no I/O connections.
Shows a typical system configuration involving the MIC-ALM-WAS-24 accessory.
Details a typical IP setup using the VJC-7000-90 VIDEOJET connect.
Configures IR mode, operation range, and maximum intensity for IR illuminators.
Controls white light intensity, timeout, and compensation for illuminators.
Explains how to operate and control the camera's wiper and washer functions.
Provides instructions for cleaning, inspection, and handling cameras with illuminators.
Details the steps required to remove the illuminator accessory if it needs replacement.
Guidelines for transferring the unit and proper disposal of electronic waste.
Essential practices for outdoor camera installation focusing on surge and lightning protection.
Lists status codes, their descriptions, and recommended actions for resolving camera issues.
A comprehensive list of auxiliary commands for controlling various camera functions.
To Next Page