Need help?Do you have a question about the Bosch REXROTH VT-MRPA1-2X and is the answer not in the manual?
General| Category | Amplifier |
|---|---|
| Number of channels | 1 |
| Protection class | IP20 |
| Input voltage range | 24 V DC |
| Weight | 0.2 kg |
Details the validity of the documentation for the VT-MRPA1-2X product.
Lists documentation required and supplementary for product operation and commissioning.
Explains standardized notes, symbols, designations, and abbreviations used in the documentation, including safety instructions.
Introduction to the safety instructions chapter and general precautions.
Defines the approved applications and usage conditions for the VT-MRPA1-2X.
Lists examples of improper use and associated liability for the VT-MRPA1-2X.
Specifies the required expertise and training for handling the VT-MRPA1-2X safely.
Provides general safety guidelines applicable to operating Bosch Rexroth products.
Highlights hazards and specific precautions related to the VT-MRPA1-2X amplifier.
Defines necessary personal protective equipment for safe operation and maintenance.
Describes how to identify the VT-MRPA1-2X product using its label and markings.
Provides guidelines for storing electronic products safely and effectively.
Lists the necessary tools for installing the VT-MRPA1-2X.
Suggests recommended accessories for connecting the VT-MRPA1-2X.
Specifies environmental, placement, and protection class requirements for installation.
Details the physical mounting procedure on a DIN rail and connection of the VT-MRPA1-2X.
Explains the process of connecting the power supply, including shielding and individual contact connections.
Presents the functional block circuit diagram of the VT-MRPA1-2X amplifier.
Identifies and explains the function of the device's operating and display elements, including status LEDs and test jacks.
Guides on selecting the appropriate valve size using the rotary switch.
Overview of the device's menu structure.
Describes the procedure for setting parameters in Standard and Expert modes.
Explains how to reset customer-specific parameters to factory defaults.
Provides instructions for cleaning and general care of the VT-MRPA1-2X.
Outlines inspection and maintenance requirements, referencing cleaning procedures.
Details the process and conditions for repairing the VT-MRPA1-2X unit.
Lists the tools needed for demounting and replacement.
Outlines safety precautions and system preparation before demounting.
Provides step-by-step instructions for removing the VT-MRPA1-2X from its mounting.
Describes how to prepare the device for storage or subsequent use.
Highlights environmental considerations for proper product disposal.
Provides instructions and address for returning products to Bosch Rexroth.
Discusses packaging materials and their recyclability.
Lists the main materials used in the construction of Bosch Rexroth electronics.
Explains the recycling process and disassembly for Bosch Rexroth products.
Provides a systematic approach to diagnosing and resolving faults.
Provides contact addresses for service, spare parts, and headquarters.
To Next Page