Bosch REXROTH VT-MRPA1-2X - Default Chapter; Table of Contents

RE 30220-B/05.2019, Valve amplifier VT-MRPA1, Bosch Rexroth AG
3/19 Content
Content
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 5
1.3.1 Safety instructions 5
1.3.2 Symbols 6
1.3.3 Designations 6
1.3.4 Abbreviations 6
2 Safety instructions 7
2.1 About this chapter 7
2.2 Intended use 7
2.3 Improper use 7
2.4 Qualification of personnel 8
2.5 General safety instructions 8
2.6 Product-specific safety instructions 9
2.7 Personal protective equipment 10
3 General information on damage to property anddamage to the product 11
4 Scope of delivery 12
5 About this product 12
5.1 Identification of the product 12
6 Transport and storage 13
6.1 Storing electronic products 13
7 Installation 13
7.1 Required tools 14
7.2 Recommended accessories 14
7.3 Installation conditions 14
7.3.1 Place of installation 14
7.4 Installing und connecting the VT-MRPA1-2X 14
7.5 Connecting the supply voltage 15
7.5.1 Shielding 16
1.1.1 General notes on shielding 16
7.5.2 Connecting the individual contacts 17
7.5.3 Suppressing interference of the system 18
8 Commissioning 18
8.1 Block circuit diagram of VT-MRPA1-2X 19
8.2 Operating and display elements 20
8.2.1 Status LEDs 20
8.2.2 Test jacks 21
8.3 Selecting the valve sizes 21
8.4 Menu 23
8.4.1 Menu structure 23
8.5 Parameter setting 24
8.5.1 Explanation of menu level “Standard mode“ 25
8.5.2 Explanation of menu level “Expert mode“ 25
8.6 Restoring the VT-MRPA1-2X to factory settings 26
9 Operation 27