To Next PageTo Next Page
Need help?Do you have a question about the Bosch Rexroth VT-VSPD Series and is the answer not in the manual?
General| Series | VT-VSPD |
|---|---|
| Command Value Input | ±10 V |
| Ramp Time | Adjustable |
| Protection Class | IP20 |
| Supply Voltage | 24 V DC |
| Storage Temperature | -20°C to +70°C |
Provides instructions for safe installation and operation of the controller card.
Explains symbols and signs used in the document for clarity.
Lists the components included in the VSPD controller card shipment.
Details the conditions and requirements for operating the controller card.
Outlines critical safety rules and regulations for installing the VSPD controller card.
Defines the VSPD's intended application and usage guidelines.
Specifies the required skills and qualifications for personnel handling the VSPD card.
Provides recommendations for electrical installation to ensure proper function and safety.
Covers procedures for diagnosing and resolving issues with the VSPD controller card.
Specifies guidelines for safely transporting, storing, and handling the VSPD controller card.
Step-by-step instructions for physically installing the VSPD controller card into its holder.
Details the pin configuration of the VSPD controller card's edge connector.
Explains the connection and structure of the VSPD's local bus for system integration.
Outlines the initial steps and checks required before commissioning the VSPD controller card.
Provides instructions and requirements for installing the essential BODAC software.
Guides users through the first steps of starting up the VSPD controller card using BODAC.
Details the display, buttons, and connectors on the VSPD controller card's front panel.
Explains the use of diagnostic ports for measurement and testing.
Presents an overview of the menu structure for configuring VSPD parameters and settings.
Describes how to use the card's keys to navigate menus, change parameters, and enter modes.
Explains how to use onboard diagnostics terminals and display indicators for troubleshooting.
Details how the BODAC software provides advanced diagnostic tools and status windows.
Lists and explains various error messages that may occur with the VSPD controller card.
Provides instructions on how to safely replace a blown fuse on the VSPD controller card.
