Bosch VT-VSPD-1-2x/V0/1-0-1 User Manual

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
The Drive & Control Company
VT-VSPD – Digital valve amplifier
for proportional valves
without position feedback
Installation and operation
RE 30523-B/09.13
Replaces: 08.07

Bosch VT-VSPD-1-2x/V0/1-0-1 Specifications

General

Brand	Bosch
Model	VT-VSPD-1-2x/V0/1-0-1
Category	Amplifier
Language	English

Summary

Installing the VSPD

Safety regulations

Specifies critical safety rules and guidelines for operating the VSPD controller card.

Personnel Selection and Qualification

Repair and Troubleshooting

Offers guidance on common issues, repair procedures, and troubleshooting steps.

Installing the card

Provides step-by-step instructions for physically installing the VSPD controller card.

Pin assignment of the edge connector

Installation Local Bus

Commissioning the VSPD controller cards

Providing readiness for operation

Installing the software BODAC

Guides through the process of installing the BODAC software for VSPD configuration.

Initial startup with BODAC

Outlines the initial steps for starting up the VSPD controller card using BODAC software.

Operating the VSPD

Display/input keys and connections of the controller card

Menu Tree for Setup and Parameters (Option Display)

Display/Input Key Operations (Option Display)

Carrying out diagnoses

Diagnostic options on the VSPD controller card

Diagnostics options by means of BODAC

Faults

Error messages

Lists and explains various error messages that may appear on the VSPD controller card.

Changing the fuse