Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
RE 30523-B/09.13 | Installation and operation Hydraulics | Bosch Rexroth AG 7/48
General 1
1.3 Preconditions for operation
The controller card is operated in an open card holder
VT3002-2x/48F or VT 3002-2x/64G
according to RE 29 928. The open card holder must be installed in a control cabinet,
since there is no shock-hazard protection provided.
When no voltage supply is provided from the system side, you can also use power
supply unit
VT-NE30
according to RE 29 929.
To Next Page
Loading...
