Why does my Bosch Iron smoke when I use it for the first time?
If smoke comes out of your Bosch Iron when connecting it for the first time, it may be due to the lubrication of some internal parts. This is normal and should stop after a few minutes.
Why does my Bosch Sensixx'x DI90 Iron make a pumping sound?
If your Bosch Iron makes a pumping sound, it means water is being pumped into the steam chamber. This is normal operation.
General| Power | 2400 W |
|---|---|
| Steam Output | 50 g/min |
| Water Tank Capacity | 300 ml |
| Cord Length | 2.5 m |
| Vertical Steam | Yes |
| Anti-Scale System | Yes |
| Drip Stop System | Yes |
| Auto Shut-Off | Yes |
| Self-Cleaning Function | Yes |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Type | Steam Iron |
| Soleplate | Ceramic |
Instructions on how to properly fill the water tank with tap water and warnings against using other liquids.
Explains the automatic steam generation based on handle grip, enhancing safety and energy saving.
Guides users on adjusting the soleplate temperature for different fabric types using the temperature control.
Instructions on setting steam control to 'eco' or 'max' and gripping the handle for continuous steam.
Describes how to cancel continuous steam and use the shot of steam button for targeted steam bursts.
Explains the self-clean filter's role in preventing scale and ensuring optimal steam production.
Details the Calc'nClean function to remove scale from the steam chamber, recommended for hard water areas.
Procedure for deep descaling using a special Bosch descaling liquid, recommended every three months.
Describes the anti-calc cartridge's function in reducing scale build-up and extending the iron's life.
To Next Page