6720892984 (2019/02) US SSB
20 | Service display
Repeat this action for all numbers to enter the password.
During this action, if you want to return to the previous screen, just press
MENU or ESC to cancel.
After the password is entered in correctly, the menu item will become
available.
The following menu items require a password*:
(Sub) Menu item Location inside menu
Climatic Compensation via ‘Heating > Climatic compensation’
Boiler via ‘Settings > Boiler’
* Passwords for different user levels are always customer specic and will
be provided by epHS to the appliance manufacturer only (due to safety
reasons).
4.2.4 DAir Sequence
The “De-Air” sequence is a safety function that starts at every power ON
and is used to remove the air from the heater-exchanger.
The DAir sequence does not start after a general reset (like the locking
error reset or 24 hours reset)
The display will show the following string during DAir sequence:
• “Dair Running”
• “Dair Error Water Pressure”
The DAir sequence can be canceled by the user by pressing the OK
button for over 5 seconds.
4.2.5 Language settings
The 900PB display has a number of different language options, such as
English, French, Chinese and Italian.
Paragraph 4.2.5.1 describes how to set the display language (and
characters) to Chinese.
Paragraph 4.2.5.2 describes how to set the language back from Chinese
to English (or any other language).
4.2.5.1 Set the display language to Chinese
Please follow the next steps, which describe how to set the display
language to Chinese:
[1] From the Status Overview, press the MENU button once
[2] Select “Settings” and press the ENTER button
[3] Select “General Settings” and press the ENTER button
[4] Select “Language” and press the ENTER button
[5] Select the Chinese language (中文) and press ENTER
After the Step 5 the text and menu items will automatically be displayed
in Chinese:
基本设置
语言
Aα
单位类型
日期时间
其他设置
Press ESC to go back in the menu and return to the Status Indication
screen.
No matter what language you set, the menu icons will always remain
universal.
4.2.5.2 Set the display language from Chinese back to English
First, make sure you the Status Indication screen is displayed, which
looks as following:
12 09
16.5°C
生活热水温度设定
49.0°C
If this is not the case, press the ESC button a couple of times until you
return to this screen.
The following steps describe how to set the display from Chinese back to
English:
[1] Press the MENU button once to enter the main Menu (菜单)
[2] Select “Settings” (设置) and press the ENTER button to access this
menu:
菜单
供暖
生活热水
Info
设置
[3] Select “General Settings” (基本设置) and press the ENTER button:
设置
基本设置
锅炉设置
[4] Select “Language” (语言) and press the ENTER button:
基本设置
语言
Aα
单位类型
日期时间
其他设置
To Next Page
Loading...
Need help?
General