58300000111195_ARA_en_f.doc – 02.06.09 Seite 7 von 102
3.2.3 Function selector
DANGER
Risk of scalding!
When steam or hot water is released, the nozzles
may initially sputter!
Rotate the function selector to
draw coffee, hot water or steam:
1. Drawing hot water –
via hot water/ steam pipe.
2. Drawing coffee –
via brewing unit to the coffee
outlet.
3. Drawing steam –
via hot water/ steam pipe.
Steam can be drawn after the
appliance has heated up to steam
temperature.
After steam has been drawn,
coffee can be brewed again
immediately.
3.2.4 Coffee dispensing button
► Press the coffee dispensing button to start the
coffee brewing process.
During the brewing process the green illuminated ring
flashes.
► If the coffee dispensing button is pressed again,
the coffee brewing process ends early.
(The grinding process is ended, the brewing process is
stopped, and the brewing unit is emptied.)
Ready to use mode is indicated by the illuminated ring
which is lit constantly.
To Next Page
Loading...
