58300000111195_ARA_en_f.doc – 02.06.09 Seite 86 von 102
7.4 Service diagnosis
7.4.1 Hardware requirements
To operate the system without errors, the following minimum
requirements must be satisfied:
Hardware requirements:
PC 486 or higher
VGA
MS DOS 6.0 or higher
Windows 95 / 98 / NT / 2000
At least 5MB disc space
on HD
3.5” disk drive
At least 2 serial interfaces
USB interface
Parallel interface
Printer
7.4.2 Service diagnosis kit (Mat.-no. 34 0995)
A service diagnosis kit is required to support diagnosis of the
appliances by PC. This kit includes the following components:
(A) Scanner (is switched between PC and test object)
(B) Connecting cable between scanner and test object
(C) CD with diagnostic software
(D) Connecting cable between PC and scanner
(E) Start installation disk
(F) Power supply unit for scanner (In: 230 V/50 Hz,
Out: 9 VAC/300 mA 2.7 VA)
To Next Page
Loading...
