Preparing hot water
Push down the sleeve a on nozzle.
Place an appropriate cup under the nozzle.
Rotate function selector to ../IX=.. and fill the cup.
Avoid the risk of scalding!
When the function selector is set
to ./!\,, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
End the process by rotating the function selector
back to _ position.
Steam for heating
drinks
Push up the sleeve a on nozzle
Immerse nozzle deep into the liquid which
isto be heated.
Slowly rotate function selector to _.
The appliance now heats up for approx.
20 seconds. Then the liquid is heated.
Avoid the risk of scalding!
When the function selector is set
to _, the nozzle may spurt slightly.
Escaping steam isvery hot. Do not
touch nozzle or direct at people!
End the process by rotating the function selector
back to _ position.
Note: When nozzle has cooled down, clean
immediately.
Dried residue is difficult to remove.
15
To Next Page
Loading...
