_-_ t'_ r,t,_ rr,
, u R u L u FF EE is displayed, turn
function selector 2 back to _ position.
[] The water hardness can still be indicated in the
display program, however the setting is not
activated.
Removing the filter
[] The appliance must be switched on.
Unscrew the filter 20 with the provided tool in
an counter-clockwise direction.
Hold down button P on display 6 for at least
2 seconds.
Select FILTER _ES I l'_0with< or >.
Press button P, display flashes.
Select FILTER l'_O I OLOwith < or >.
Press button Pto save the setting.
Press the Exit button. Back to standby.
Important
Replace the filter after approx, two months or after
approx. 400 brews.
Do not insert the filter ifthe U l'_l ]- EFt' r l F
LL
message lights up. First descale the appliance.
Before descaling the appliance, take the filter out
of the water tank.
When the filter has been inserted, it must be
rinsed. Follow the displayed instructions.
If the appliance is always operated with an inserted
filter, it should be descaled once or twice a year,
even ifthe descale message is not displayed.
If softened water from a domestic descaling unit is
used, a filter should not be inserted.
Re-order the filter quoting order no. 461732.
2O
To Next Page
Loading...
