That the declared vibration total value(s) and the declared noise emission value(s) have been measured in
accordance with a standard test method any may be used for comparing one tool to another.
That the declared vibration total value(s) and the declared noise emission value(s) may also be used in a preliminary
assessment of exposure.
That the vibration and noise emissions during actual use of the power tool can differ from the declared values
depending on the ways in which the tool is used especially what kind of workpiece is processed; and of the need to
identify safety measures to protect the operator that are based on an estimation of the exposure measures in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
Assembly
For Your Safety
Warning! Switch off and remove battery from power tool before adjusting or cleaning.
Caution! Do not touch the rotating chain.
Do not operate the chain saw near other people, children or animals. Do not operate the chain saw after
To Next Page
Loading...
