AutoDome Modular Camera System Table of Contents | en iii
Bosch Security Systems, Inc. Firmware Update Manual F01U096914 | 1.05 | 2008.10
Table of Contents
1 VG4 Firmware Updates via a TCP/IP Network 1
1.1 Upgrading the IP AutoDome 1
1.1.1 Minimum Requirements 1
1.1.2 Navigate to the Firmware Update Page 2
1.1.3 About VG4 AutoDome Firmware Updates 3
1.1.4 Order to Upload Files 3
1.1.5 Selecting and Uploading Firmware Files 4
1.1.6 Alternate Language Option 8
1.1.7 Changing the VG4 AutoDome OSD Language 9
2 VG4 Firmware Updates via the CTFID 11
2.1 Upgrading the VG4 AutoDome 11
2.2 Hardware Connections 11
2.2.1 Bilinx Connections 12
2.2.2 Serial Connections 12
2.3 Launching the CTFID Software 12
2.3.1 Launching with a Bilinx Connection 13
2.3.2 Launching with a RS232/RS485 Serial Connection 14
2.4 About VG4 AutoDome Firmware Updates 16
2.4.1 Minimum Requirements 16
2.4.2 Order to Upload Files 16
2.4.3 Selecting and Uploading Firmware Files 17
2.4.4 Updating the SC Boot file 18
2.4.5 Updating the SC Main files 21
2.4.6 Additional Language Option 24
2.4.7 Changing the VG4 AutoDome OSD Language 25
3 Troubleshooting 27
3.1 Pre-production Firmware Versions (All Models) 27
3.2 VG4 AutoDome with an IP Communications Module 27
3.2.1 Web Browser Issues 27
3.2.2 IP Firmware Update Error 28
3.2.3 IP Firmware Upgrade Fails 28
3.3 Upgrading Firmware with the CTFID 28
3.3.1 CTFID does not Connect 28
3.3.2 BILINX 29
3.3.3 Serial (RS232 or RS485) 29
3.3.4 Firmware Upgrade via CTFID Fails 29
3.4 Auto Tracker Does not Activate with ON 78 ENTER 29
To Next Page
Loading...
Need help?
General
