8 en | VG4 Firmware Updates via a TCP/IP Network AutoDome Modular Camera System
F01U096914 | 1.05 | 2008.10 Firmware Update Manual Bosch Security Systems, Inc.
1.1.6 Alternate Language Option
Certain Service Packs, versions 1.03 and later, may include the option to upload additional
languages to the VG4 AutoDome. The firmware file to add a new language is located in the
Language folder. Before installing an additional language, you must first upgrade the SCBoot
and the SysCont files (refer to Section 1.1.5 Selecting and Uploading Firmware Files, page 4).
The procedure for uploading an additional language is the same as uploading the other files.
To install an additional language to the AutoDome do the following:
1. From the IP AutoDome LIVEPAGE, select the SETTINGS link at the top of the window.
2. Click the Service Settings link in the left pane.
3. Click the Maintenance option to open the Maintenance window.
4. In the Maintenance window, click the firmware upload Search button, and browse to the
Language folder in the service pack.
5. Select and open the Language folder.
Figure 1.10 Language folder
6. Select the language_Lang_xx.xx.xx.xx.G4i file, and then click the Open button.
Figure 1.11 Select the Language file
7. Check the Language Table box under the subcomponents upload window.
Figure 1.12 Check the Language Table box
To Next Page
Loading...
Need help?
General
