Cleaning and care de
Clean the strainer on the tap
3. Connect the water inlet hose and
check for leaks.
Note: Note the information on
security
→
page 4
and avoid damage to property.
the →
Page 11,
to use your device
safely.
Pre-condition: The water inlet hose
is empty.
1. Remove the water inlet hose
from the tap.
Clean the sieve on the device
Note: Note the information on
security
→
page 4
and avoid damage to property.
the →
Page 11,
to use your device
safely.
Pre-condition: The water inlet hose
is empty.
→
"Empty the water inlet hose",
Page 48
2. Clean the sieve with a small brush.
1. Remove the hose on the back of
the device.
1
2
49
To Next Page
Loading...
