Transport, storage and disposal NL
18.1 Emergency release
1. Close the tap.
2. Empty the water inlet hose.
3. Turn off the device.
unlock door
Required: The drain pump is empty.
→
Page 39
4. Unplug the appliance from the
mains.
1. ATTENTION! Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
5. Let the suds drain.
→
"clean drain pump",
Page 39
6. Disassemble the hoses.
7. Empty the dosing containers.
Pull the emergency release
downwards with the aid of a tool
and release it.
19.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
1. Remove the 4 cover caps using a
screwdriver.
a The door lock is unlocked.
2. Place the service door and click it into
place.
3. Close the service door.
T1
transport, storage and disposal
9 Transport, on-
hit and drain
Keep the cover caps.
2. Install the 4 transport locks. When
doing so, observe the description
Removing transport locks and
proceed in reverse order.
Thuh
transport, store anddrain
Here you will get an explanation about the way
on which you prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
19.3 Restarting the device
19.1 Dismantling the device
▶
For more information, see
→
"Set up and connect"
Page 13
and
→
"For the first use",
Page 21
.
Remark: Detailed instructions for use
can be found at www.bosch-
home.com or by scanning the QR code
on the title page of these operating
instructions.
55
To Next Page
Loading...
