Interaction between the eBike system and gear shifting
The gear shifting should be used with an eBike drive in the same way as
with a normal bicycle (observe the operating instructions of your eBike
on this point). Irrespective of the type of gear shifting, it is advisable that
you briey reduce the pressure on the pedals when changing gear. This
will aid gear shifting and reduce wear on the powertrain. By selecting the
correct gear, you can increase your speed and range while applying the
same amount of force.
Switching bicycle lights on/off (Mini Remote only)
Check that your bike lights are working correctly before every use.
To switch the bicycle lights on and off, press the button to increase the
assistance level/bicycle lights (4) for longer than 1 s.
Establishing a smartphone connection
In order to be able to use the following eBike functions, a
smartphone with the eBike Flow app is required.
Connection to the app occurs via a Bluetooth® connection.
1. Switch on the eBike system and do not start riding the eBike.
2. Begin Bluetooth® pairing by pressing and holding (> 3 s)
the on/off button (12). Release the on/off button (12)
as soon as the lowest bar on the battery charge indicator
(13) shows the pairing process by ashing blue.
3. Conrm the connection request in the eBike Flow app.
Activity tracking
In order to record activities, it is necessary to register and log into the
eBike Flow app. To record activities, you must consent to the storage
of your location data in the app. Without this, your activities cannot
be recorded in the app. For location data to be recorded, you must be
logged in as the user.
<eBike Lock>
The <eBike Lock> can be activated for each user via the eBike Flow app.
In the process, a key for unlocking the eBike is saved on the smartphone.
The <eBike Lock> is automatically enabled in the following cases:
– Switching off the eBike system via the control unit
– Automatically switching off the eBike system
– Removing the on-board computer
If the eBike system is switched on and the smartphone is connected to the
eBike via Bluetooth®, the eBike will be unlocked.
<eBike Lock> is linked to your user account.
If you lose your smartphone, you can log in to your user account on the
eBike Flow app using another smartphone and unlock then the eBike.
Warning! If you select a setting in the app that could have negative
consequences in combination with the <eBike Lock> (e.g. deleting your
eBike or user account), you will be shown warning messages beforehand.
Please read through these thoroughly and adhere to the warnings that are
issued (e.g. before deleting your eBike or user account).
Setting Up the <eBike Lock>
Setting up the <eBike Lock>, the following conditions must be fullled:
– The eBike Flow app is installed.
– A user account has been created.
– The eBike is not currently updating.
– The eBike is connected to the smartphone via Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufciently charged and the charging cable is not
connected. You can set up the <eBike Lock> in the eBike Flow app in the
Settings menu item.
Software updates
Software updates must be manually started in the eBike Flow app.
Software updates are transferred to the operating unit in the background
of the app as soon as it is connected to the app. During the update
process, a green ashing light on the battery charge indicator (13) shows
the progress. The system is then restarted. You can control
the software updates via the eBike Flow app.
WIRELESS SHIFT, LIGHTS & CONNECTIVITY
MINI REMOTE (BRC3100 | BCR3300)
24
To Next Page
Loading...
