enTroubleshooting
Disturbance Cause and troubleshooting
spin result is
unsatisfactory
lending The laundry is
too wet / too damp.
Drain pipe or water drain hose is clogged.
▶ Clean the drain pipe and water drain hose.
Drain pipe or water drain hose is kinked or pinched.
▶ Make sure the drain pipe and water drain hose are
not kinked or pinched.
Imbalance control system stopped spinning due to
uneven laundry distribution.
▶ Redistribute the laundry in the drum.
A notice:Put large and small items of laundry together
in the drum. Items of laundry of different sizes spread
out better when spinning.
▶ Start the programSling .
Imbalance control system compensates for
imbalance by reducing spin speed.
▶ Redistribute the laundry in the drum.
A notice:Put large and small items of laundry together
in the drum. Items of laundry of different sizes spread
out better when spinning.
▶ Start the programSling .
detergent residue
en on the damp
laundry.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
▶ Start the programWash .
detergent residue
en on the dry
laundry.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
▶ Brush the laundry after washing and drying.
at the water inlet
hose running water
out.
Water inlet hose is not correctly / firmly connected.
1.Connect the water inlet hose correctly.
→
"Connecting the water inlet hose", page 16
2.Tighten the screw connection.
at the water outlet
hose running water
out.
Water drain hose is damaged.
▶ Replace the damaged water drain hose.
46
To Next Page
