Bose 802C User Manual

4
DEVICE HANDLING
ELECTROSTATIC DISCHARGE SENSITIVE (ESDS)
This unit contains ESDS devices. We recommend the following precautions when repairing,
replacing or transporting ESDS devices:
• Perform work at an electrically grounded work station.
• Wear wrist straps that connect to the station or heel straps that connect to conductive floor
mats.
• Avoid touching the leads or contacts of ESDS devices or PC boards even if properly
grounded. Handle boards by the edges only.
• Transport or store ESDS devices in ESD protective bags, bins, or totes. Do not insert unpro-
tected devices into materials such as plastic, polystyrene foam, clear plastic bags, bubble wrap
or plastic trays.
CAUTION: THE 802
®
C SYSTEM CONTROLLER CONTAINS NO USER-SERVICEABLE
PARTS. TO PREVENT WARRANTY INFRACTIONS, REFER SERVICING TO WARRANTY
SERVICE STATIONS OR FACTORY SERVICE.

Bose 802C Specifications

General

Weight	5 lbs (2.3 kg)
Compatibility	Bose 802 Loudspeaker System
Functions	Equalization, Crossover, Limiting
Equalization	Specifically tailored for the Bose 802 loudspeaker system
Signal-to-Noise Ratio	>90 dB
Power Requirements	100-240 V, 50/60 Hz
Input Impedance	20 kOhms (balanced)
Dimensions	1.75" H x 19" W x 7.8" D (4.4 cm x 48.3 cm x 19.8 cm)