Need help?Do you have a question about the Bose PANARAY System and is the answer not in the manual?
General| Power Requirements | 100-240VAC, 50/60 Hz |
|---|---|
| AD/DA Converters | 24-bit |
| Crossover | Yes |
| Equalization | Yes |
| Delay | Yes |
| Limiter | Yes |
| Presets | Multiple user-configurable presets |
| DSP | Yes |
| Type | Digital Signal Processor (DSP) Controller |
| Compatibility | Bose PANARAY speakers and systems |
Covers essential user guidance for safe operation, cleaning, installation, and servicing.
Warnings related to electric shock, fire risks, and proper grounding, including cautions for use.
Overview of the buttons, meters, display, and LEDs on the device's front panel.
Details on XLR inputs/outputs, COM port, power input, and XLR wiring.
Configuration for 802-III Speaker Stereo Full Range, detailing inputs and output routing.
Setup for 802-III Speaker Stereo with MB4 Speaker Stereo Bass, showing output routing.
Steps to configure for Stereo Mid-High with Mono Bass, involving UTILITY button settings.
Configuration for 402-II Speaker Mono Full Range, showing controller inputs and output routing.
Setup for 502A Speaker Mono with 502B Speaker Mono, detailing inputs and output routing.
Description and configuration for MB4 2x Broadside Bass Array, showing output routing.
Description and configuration for MB4 2x Endfire Bass Array, including delay settings.
Instructions for accessing and loading presets for dual mono mode operation.
Demonstrates a dual mono preset configuration with specific speaker models.
Shows another dual mono preset example using different speaker combinations.
Details the parameters for four independent output delays, including On/Off and time adjustments.
Explains parameters for four independent output limiters to protect loudspeakers from overdrive.
Covers parameters for output level, output range, input sensitivity, and input trim adjustments.
Details delay/limiter masters, input configuration, lockout, custom presets, and display view angle.
Explains how to enable and disable the user lockout feature to prevent unauthorized changes.
Lists the various audio sources and frequency ranges that can be routed to each of the four outputs.
Guides on setting input sensitivity to match audio source and output range to amplifier sensitivity.
Table and steps to match the controller's Output Range to the amplifier's input sensitivity.
Instructions on how to save, name, activate, and deactivate custom presets.
Steps for selecting and loading specific bass array configurations from the preset banks.
Details on components, spacing, and output assignments for the MB4 4x Endfire Bass Array.
Explains setup for MB4 2x Endfire arrays, including spacing and component connections.
Details connections and spacing requirements for the MB4 2x Broadside Bass Array.
Introduces the mono bank presets and lists the different speaker series covered.
Introduces the stereo bank presets and lists the speaker series covered.
Introduces the bass array bank presets and lists the configurations available.
To Next Page
