Need help?Do you have a question about the Bose Panaray System Digital Controller II and is the answer not in the manual?
General| Brand | Bose |
|---|---|
| Model | Panaray System Digital Controller II |
| Category | Recording Equipment |
| Language | English |
Please read this owner's guide carefully for proper setup and operation. Save for future reference.
Warnings against exposure to rain, moisture, liquids, and general handling precautions.
Explanation of lightning flash and exclamation point symbols indicating electrical hazards.
CE compliance, disconnect device, and protective earthing connection requirements.
Covers 18 essential safety instructions for operating the apparatus safely and correctly.
Information on FCC compliance, potential interference, and methods to correct it.
Details the standby button, LCD display, and navigation arrow buttons on the front panel.
Describes the function of Channel 1 and Channel 2 Signal and Clip LEDs.
Identifies removable rack ears as a physical feature of the front panel.
Details the balanced XLR input and output connectors on the rear panel.
Covers RS232 for software updates and the IEC power cord input.
Illustrates the standard wiring for balanced XLR connectors (Tip, Ring, Sleeve).
Instructions on how to enter and exit the Utility Mode by holding the SELECT/LOAD button.
Lists parameters like Input Sensitivity, Output Range, Output Level, Limiting, Bass Mono Sum, and User Lockout.
Step-by-step guide to select and load presets using the front panel controls.
Configuration example for a stereo full-range speaker setup.
Configuration example for stereo mid-high speakers with bass.
Configuration example for stereo mid-high with mono bass for speaker setups.
Configuration example for a mono full-range speaker setup.
Configuration example for mono mid-high speakers with mono bass.
Configuration example for a 2x Endfire bass array setup.
Configuration example for a 4x Endfire bass array setup.
To Next Page
