Need help?Do you have a question about the Bose ControlSpace EX-1280 and is the answer not in the manual?
General| Frequency range | 18 - 20000 Hz |
|---|---|
| Channels quantity | 20 channels |
| Product color | Black |
| Rack capacity | 1U |
| Rack mounting | Yes |
| LED indicators | Power |
| Audio input | 3.81 mm detachable Euroblock, 6-pin |
| RS-232 ports | 1 |
| USB connector type | Micro-USB B, USB Type-A |
| Standard interfaces | USB |
| Ethernet LAN (RJ-45) ports | 3 |
| Microphone included | No |
| DC input voltage | 230 V |
| Power consumption (typical) | 35 W |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 282 mm |
|---|---|
| Width | 483 mm |
| Height | 44 mm |
| Weight | 3200 g |
Key safety guidelines for equipment operation, handling, and placement.
Critical warnings regarding installation, environmental hazards, misuse, and product limitations.
Details on compliance with FCC and Industry Canada regulations for radio frequency devices.
Tables detailing restricted substances in product components per Chinese and Taiwanese regulations.
List of items included in the product carton, varying by model.
List of compatible Bose controllers and endpoints for the EX series processors.
Identification and description of the EX-1280 front and rear panel connectors and indicators.
Identification and description of the EX-440C front and rear panel connectors and indicators.
Identification and description of the EX-1280C front and rear panel connectors and indicators.
Identification and description of the EX-12AEC front and rear panel connectors and indicators.
Instructions for downloading and installing the ControlSpace Designer software on a computer.
Guidelines for securely mounting the processor unit into standard rack equipment.
Details on making balanced dual-channel analog audio connections using Euroblock connectors.
Instructions for connecting AmpLink-enabled amplifiers using shielded Cat 5 cable.
Information on connecting to Dante digital audio networks using Ethernet ports.
Guidance for connecting VoIP, analog telephone lines, and soft codecs.
Details on using GPIO, Serial, and CC-16 ports for external control hardware.
Steps for connecting the processor to an AC mains power outlet.
Steps for configuring the processor using ControlSpace Designer software after network setup.
Overview of the processor's front-panel display functions for viewing settings and metering.
Description of the six main menu options for navigating the processor's interface.
Information on viewing Dante audio levels and channel status on the front-panel display.
Details on viewing analog input and output levels, polarity, and mute status.
Information on viewing AmpLink output audio levels on the front-panel display.
Displays audio levels for VoIP, Phone, and USB connections.
Overview of the six options available within the CONFIG menu.
Configuration options for ControlSpace and VoIP network settings, including IP mode and addresses.
Pages displaying Dante device information and the processor's software/firmware versions.
Information on the uploaded design file and front-panel display settings like auto-shutoff and brightness.
Guidance on updating the ControlSpace Designer software and processor firmware.
Solutions for common problems such as no power, no sound, distorted audio, and network connectivity issues.
Detailed technical specifications for the EX-1280 processor, covering DSP, audio, connectivity, and electrical properties.
Detailed technical specifications for the EX-440C processor, covering DSP, audio, AEC, connectivity, and electrical properties.
Detailed technical specifications for the EX-1280C processor, covering DSP, audio, connectivity, and electrical properties.
Detailed technical specifications for the EX-12AEC processor, covering DSP, AEC, connectivity, and electrical properties.
Information regarding compliance with FCC rules for telephone network connections.
Statement of compliance with Canadian Innovation, Science and Economic Development technical specifications.
To Next Page
