5
SPECIFICATIONS
Input
onnections:
(per channel)
ne
1
balanced female XLR connector
One (1) unbalanced 1/4" phone jack
Output Connections:
(per channel)
Two (2) 1/4" phone jacks per channel
(outputs used depend upon mode selected)
Input Impedance: Balanced input, 4kΩ
Unbalanced input, 42kΩ
Electronic Crossover
Frequency: 180Hz (bi-amplified mode only)
Maximum Output Level: 4 Volts (+12dB into 600Ω, 50Hz-16kHz)
Total Harmonic Distortion: Less than .02% at 1 Volt (0dB)
Less than .2% at 8 Volts (18dB)
Output Noise: Less than 20uV (-9dBV) A-weighted
Power Requirements: 120 Vac, 50-60Hz, 3.5 Watts
220 Vac, 50-60Hz, (European)
100 Vac, 50-60Hz, (Japan)
Dimensions: 1 3/4"H x 10" W x 5" D
(4.4 x 25.4 x 12.7 cm)
Weight: 1.97 lbs (.895 kg)
To Next Page
Loading...
