12 January 4, 2002 AM262840_00_V.pdf
Setting Up Your Lifestyle
®
Stereo Amplifier
Setting up the RC-20 remote control for Zone 2
If your system uses a Model 20 music center, you need to set up a second RC-20 remote control to operate
the ZONE 2 outputs.
1. Remove the remote control battery cover and locate the miniature switches (Figure 11).
2. Make sure that the house code settings (switches 1, 2, 3, and 4) match those in your first remote.
3. Slide switch 5 down (off), and switches 6 and 8 up (on).
Note: Refer to your Lifestyle
®
system owner’s guide for more information on operating your system in more
than one room.
Figure 11
Setting up a Zone 2 remote
control
234l
ON
5678
K
40
To Next Page
Loading...
Need help?
General
