Bose Cinemate 10 - Using Alternate Connections; Connecting to a Cable;Satellite Box

Using Alternate Connections
Alternate connections
You may need to use an alternate connection:
•
If your TV does not have any audio output connections or does not deliver
the audio to the CineMate® 15/10 system. See "Connecting the system to a
cable/satellite box audio output connector" or "Connecting the system to a
TV
headphones output connector" on page 17.
• If you do not get sound from a DVD player that is connected to your TV.
See "Connecting the system to two devices"
on page 18.
Connecting the system to a cable/satellite box audio output
connector
You can connect a cable/satellite box to the CineMate® 15/10 system.
Use
only one audio cable.
Caution: If using
an optical cable, see page 13 for important instructions.
1. On the back of your cable/satellite box, locate the Audio Out connector panel.
Audio OUT
Cable/satellite
box
Make only one connection
D
Optical
Optical Coax L R
D
@0
-Analog-
Audio IN CineMate® 15/1 0 system
2. Choose the audio cable.
3. Connect the audio cable from your cable/satellite box's
Audio Out connector
panel to the sound
bar.
16- English