Bose Cinemate 10 - Programming the universal remote; Troubleshooting Remote Power

Using
the
System
Programming
the
Cine Mate®
15
system
universal
remote
You
can program the universal
remote
to
control your
TV,
DVD,
Blu-ray
Disc™
player, cable/satellite box, game system
or
DVR.
Programming
your
remote
to
control
your
source
1. Power on your source.
2. Locate the code for your source's brand
in
the Universal Remote Device Codes
book (provided).
3.
On the remote
control,
press and hold
the appropriate source button
until all
six source buttons
glow, then
release.
For
example,
to
program your
TV,
press and hold
Only
the appropriate source button glows.
4.
On
the number keypad, enter the code for your source's brand.
Note:
If all
six buttons
blink
three times, you entered
an
invalid
code.
Repeat steps
3
and
4.
5. Press
+ on the
volume
button.
6. Test the source for basic functions:
•
TV: press the
channel
buttons. Press
111M''•·
The settings menu appears.
Press
~
and
~
to
navigate.
•
Cable/satellite
box: press
-·
1
tp.
The programming guide appears.
Press
~
and
~
to
navigate.
•
DVD
or
Blu-ray
Disc™
player:
press
111ei1If•'tt.
The settings menu appears.
Press
~
and
~
to
navigate.
•
Game
system:
press
~
and
~
to
navigate through your menu.
7.
~I!!W!II
..
to
save
If
your
TV
does
not
power
off
Use the remote control's
code scanner
to
find the code for your source.
1. Press
+
on the
volume
button
to
try another code.
Note:
If all
six buttons
blink three times, you have
cycled
through
all
codes for
your source.
2. Test the source for basic functions (see step 6
in
"Program
the remote
to
control
your
source").
3. Repeat steps
1
and
2
until
your source responds.
4.
English- 23