Bose Cinemate 10 - Connecting to a TV Headphones Output

Using Alternate Connections
Connecting
the
system
to
a
TV headphones
output
connector
If your
TV
only
has a headphones connector, you need a
dual RCA
to
3.5 mm
stereo
cable
(not provided)
to
connect
to
the CineMate® 15/1 0 system.
1.
Insert the stereo
plug
into your TV's headphones connector.
2.
Insert the white plug into the
L
connector on the sound
bar.
3.
Insert the
red
plug into the
R connector
on
the soundbar.
4.
Ensure your
TV
speakers are on. Refer
to
your TV's owner's guide for more
information.
5.
To
ensure
optimal volume control from your system, set your TV's
volume
to
75
percent
of
maximum; then set the volume level
of
your system using the
remote
control.
Audio
OUT
TV headphones or other
variable
audio output
Optical
Coax
L R
••
D
0
@ 0
-Analog-
Audio
IN CineMate® 15/1
0
system
~-
Stereo
plug
This connection requires a
dual RCA
to
3.5 mm stereo
cable
(not provided).
English- 17