Bose Lifestyle 38 - Designating One Video Tuner

Followthe process below:
Turn on your component. Turn on the TV and be sure to select the Video Input on the TV for
the media center. Then using the LIFESTYLE ®remote control, press the AUXsource button and
continue:
1. Identify the device:
• From the RemoteControloptions in the System menu, select AUX Device.
• Move right and up or down in the list to select a component by pressing Enter.
2. Identify the brand:
• In the menu options on the left, select AUX Brand.
• Move right and up or down in the alphabetical list to locate your brand.
• Press Entertoselect that brand.
3. Select the device code:
• From the menu options on the left, select AUX Device Code.
• Move right to select the first code.
• Press the Play or Channel/Track up button on the LIFESTYLE ®remote control.
- If the component responds, press other function buttons to make sure important
functions on the component also work.
- If the component does not respond, select a different code and try again.
• When you have chosen the best code for your component, press the Enterbutton.
• Press the Systemor Exitbutton to leave the System menu.
Designating one video tuner
If you set the LIFESTYLE®remote to control several video components, you can choose one
of them as then primary channel selector. This allows your remote to change the channels on
your cable box, even when TV or VCR is the selected source. So you never need to switch to
CBL/SAT to change stations.
Note: For general guidelines on using the LIFESTYLE_ System menu, refer to "Making system
adjustments" on page 40.
Make this selection from the RemoteControloptions in the System menu. In the rv Tuner list,
select one of your components. Then press the Systemor Exitbutton to move out of the menu.
Figure 11
Designating the TVas video
tuner
33