4
SPECIFICATIONS
4402™ II
Mechanical Specification
Dimensions:
34"H x 19.2"W front
12.2"W x 25.3"D rear
86.4 x 48.8cm
31.0 x 64.3cm
Weight: 70lb 32kg
Components: One High-Power
Compression Driver
One Mid-range Driver
t1.4hp
Vee Four Mid-range
Driver Assembly
Frequency Range: 160Hz to 16kHz (± 3dB)
Crossover frequency 2kHz
Nominal Impedance: Passive 2-Way
Bi-amplified
Mid-frequency
High-frequency
8Ω
8Ω
8Ω
Maximum Acoustic Output:
(IEC Noise)
Passive 2-Way 130dB SPL, 1m (rms)
136dB SPL, 1m (peak)
Bi-amplified 130dB SPL, 1m (rms)
136dB SPL, 1m (peak)
Sensitivity: (Pink Noise) Passive 2-Way
Bi-amplified
Mid-frequency
High-frequency
108dB SPL, 1w, 1m
106dB SPL, 1w, 1m
107dB SPL, 1w, 1m
Beamwidth (-6dB point): Horizontal
Vertical
36 degrees
36 degrees
Maximum Recommended
Amplifier Power:
Passive 2-Way
Bi-amplified
Mid-frequency
High-frequency
600W into 8Ω
600W into 8Ω
150W into 8Ω
To Next Page
Loading...
