Bose L1 Pro32

Other manuals for Bose L1 Pro32

Firmware Update4 pages

Service Manual42 pages

Questions and Answers:

C
Christopher PatelJul 25, 2025
How to fix no sound on Bose Speaker System?
- A
  adicksonJul 25, 2025
  If you're not getting any sound from your Bose L1 Pro Speaker System, here are a few things to check: * First, ensure that your L1 Pro is powered on. * Verify that your instrument is correctly plugged into the Channel Input. * Confirm that the volume is turned up, both on your audio source and on the L1 Pro itself. * Also, ensure that the L1 Pro isn't in AutoOff/Low-power Standby mode and that the Channel Mute button is not engaged. * To rule out issues with your instrument, try plugging it into a different amplifier to ensure it's working correctly.
W
William ThomasJul 30, 2025
Why is my Bose Speaker System humming with nothing plugged in?
- V
  Virginia GilmoreJul 30, 2025
  If you hear a hum or buzz from your Bose L1 Pro when nothing is plugged in, use an AC outlet tester to check the AC outlet for reversed or open (hot, neutral, and/or ground) contacts. If you're using an extension cord, try plugging the L1 Pro directly into the outlet.
K
Kurt FerrellAug 5, 2025
Why won't my Bluetooth device connect to my Bose L1 Pro32?
- N
  Nicole RodriguezAug 5, 2025
  If your Bluetooth device isn't connecting to your Bose L1 Pro loudspeaker, consider these steps: 1. If a passcode is required, verify that you've entered the correct one. 2. Ensure that Bluetooth is enabled on your device. 3. Your device could be out of range, so move it closer to the L1 Pro. 4. Try turning off other nearby Bluetooth devices or disabling their Bluetooth functionality. 5. Clear the loudspeaker's memory by pressing and holding the Bluetooth Pair Button for ten seconds, and then delete the L1 Pro from your device's Bluetooth memory. Pair the Bluetooth device with the L1 Pro again. 6. Power cycle the L1 Pro by turning it off and then back on before attempting to re-pair your device.
S
Sarah Carey DDSAug 9, 2025
How to stop my Bose Speaker System from distorting sound?
- L
  Lori Mosley MDAug 9, 2025
  If your instrument or audio source sounds distorted through your Bose L1 Pro, try the following: * Reduce the volume on the source. * Lower the channel volume. * Try using a different audio source or instrument to see if the issue persists.
R
Rebecca NelsonAug 14, 2025
How to reduce microphone feedback on Bose Speaker System?
- A
  Angela HunterSep 12, 2025
  To minimize microphone feedback with your Bose L1 Pro, consider these adjustments: * Reduce the channel volume. * Adjust the microphone's position so it's not pointing directly at the L1 Pro. * Try a different microphone. * Experiment with different positions for both the L1 Pro and the vocalist on stage. * Increase the distance between the L1 Pro and the microphone. * If you're using a vocal effects processor, ensure it's not contributing to the feedback.
K
krystal59Aug 19, 2025
What to do if standby LED is flashing red on Bose L1 Pro32 Speaker System?
- B
  Brandy LewisSep 12, 2025
  If the standby LED on your Bose L1 Pro is flashing red, indicating a thermal fault, turn off the L1 Pro and allow it to cool down for 30 minutes before turning it back on. Additionally, move the L1 Pro to a cooler location with better ventilation.

Bose L1 Pro32 Specifications

General

Coverage Pattern	180° H x 0° V
Bluetooth	Yes
Battery Life	Not applicable
Type	Portable Line Array System
Maximum SPL	126dB
System Power	2000W peak
Inputs	2 x XLR-1/4" combo
Outputs	XLR line output

Summary

Important Safety Instructions

General Safety Warnings and Cautions

Key safety warnings and cautions for product usage, including electrical shock, choking hazards, and medical devices.

Regulatory Information

Power State Information

Details power consumption in different modes and automatic switching times.

FCC Compliance and Radio Frequency Information

FCC and ISED Canada compliance statements, including interference guidelines and user responsibilities.

Overview

Package Contents

Lists all items included in the L1 Pro32 package.

Optional Accessories

Information about available accessories for the L1 Pro32 system.

Setup

Connections and Controls Overview

Details the various input/output ports, buttons, and controls on the L1 Pro32.

Assembling the Power Stand and Array

Step-by-step guide on how to physically assemble the L1 Pro32 components.

Connecting Power and Subwoofers

Instructions for connecting the L1 Pro32 to power and optional Sub1/Sub2 modules.

AutoOffLow-power Standby

Information on the device's power saving standby mode and how to manage it.

Connecting Sources

Guide to connecting various audio sources to the L1 Pro32's input channels.

Channel 1 & 2 Controls

Details on operating controls for channels 1 and 2, including ToneMatch presets and parameter adjustments.

Channel 3 and Bluetooth Connectivity

How to connect Bluetooth devices and use line-level inputs on channel 3.

L1 Mix App Control

Instructions for using the L1 Mix app for remote control and audio streaming.

Additional Adjustments and Settings

Details channel mute, phantom power, and system EQ features for fine-tuning.

Setup Scenarios

Illustrates common ways to connect instruments and sources for various performance setups.

Setup Scenarios

Musician Setup with Subwoofer

Diagram for a basic musician setup including a subwoofer.

Musician with Mobile Device and Subwoofer

Connecting a musician setup with a mobile device and subwoofer.

Band Setup with Subwoofer

Diagram for a band setup featuring multiple instruments and a subwoofer.

Musician Setup with T8 S Mixer

Connecting the L1 Pro32 to a T8S mixer for enhanced control and sound.

Musician Setup with Analog Sub Connection

Illustrates connecting a musician setup using analog connections for the subwoofer.

Stereo Musician Setup with T4 S Mixer

Connecting the L1 Pro32 in stereo with a T4S mixer and dual subwoofers.

DJ Stereo Setup with Two Subwoofers

Diagram for a DJ setup in stereo configuration with two subwoofers.

DJ Mono Setup with Stacked Subwoofers

Connecting a DJ setup in mono with two stacked subwoofers.

DJ Mono Setup with Cardioid Subwoofers

Connecting a DJ setup in mono with two stacked cardioid subwoofers.

DJ Stereo Setup with Four Stacked Subwoofers

Diagram for a DJ stereo setup with four stacked subwoofers.

Dual Mono Musician Setup with Two Subwoofers

Connecting a musician setup in dual mono with two subwoofers.

Musician Setup with S1 Pro Monitor

Connecting the L1 Pro32 to an S1 Pro monitor and a subwoofer.

Care & Maintenance

Cleaning Your L1 Pro

Instructions on how to safely clean the L1 Pro32 enclosure and vents.

Troubleshooting Common Issues

Solutions for common problems such as no power, no sound, and LED status.

Microphone Feedback Troubleshooting

Tips for resolving microphone feedback issues with the L1 Pro32.

Bluetooth Connectivity Troubleshooting

Steps to resolve issues when a Bluetooth device fails to connect.

Hum and Noise Troubleshooting

Guidance on reducing hum when daisy-chaining multiple audio units.

Related product manuals

Bose LIFESTYLE RoomMate

44 pages

Bose Lifestyle Homewide

42 pages

Bose PANARAY LT II Series

18 pages

Lifestyle Surround Sound Speaker System

Bose CineMate GS Series II

124 pages

Table of Contents

Other manuals for Bose L1 Pro32

Questions and Answers:

Bose L1 Pro32 Specifications

Summary

Important Safety Instructions

General Safety Warnings and Cautions

Regulatory Information

Power State Information

FCC Compliance and Radio Frequency Information

Overview

Package Contents

Optional Accessories

Setup

Connections and Controls Overview

Assembling the Power Stand and Array

Connecting Power and Subwoofers

AutoOffLow-power Standby

Connecting Sources

Channel 1 & 2 Controls

Channel 3 and Bluetooth Connectivity

L1 Mix App Control

Additional Adjustments and Settings

Setup Scenarios

Setup Scenarios

Musician Setup with Subwoofer

Musician with Mobile Device and Subwoofer

Band Setup with Subwoofer

Musician Setup with T8 S Mixer

Musician Setup with Analog Sub Connection

Stereo Musician Setup with T4 S Mixer

DJ Stereo Setup with Two Subwoofers

DJ Mono Setup with Stacked Subwoofers

DJ Mono Setup with Cardioid Subwoofers

DJ Stereo Setup with Four Stacked Subwoofers

Dual Mono Musician Setup with Two Subwoofers

Musician Setup with S1 Pro Monitor

Care & Maintenance

Cleaning Your L1 Pro

Troubleshooting Common Issues

Microphone Feedback Troubleshooting

Bluetooth Connectivity Troubleshooting

Hum and Noise Troubleshooting

Related product manuals