Bose L1 Pro16

Other manuals for Bose L1 Pro16

Firmware Update4 pages

Service Manual53 pages

Questions and Answers:

J
James SmithAug 12, 2025
Why is there no sound coming from my Bose Speaker System?
- R
  rmaynardAug 12, 2025
  If you're not getting any sound from your Bose Speaker System, first ensure that the L1 Pro is powered on and your instrument is properly connected to the Channel Input. Check that the volume is turned up both on your audio source and on the L1 Pro itself. Also, verify that the L1 Pro isn't in AutoOff/Low-power Standby mode and that the Channel Mute button is not engaged. To isolate the problem, try plugging your instrument into a different amplifier to confirm that the source is working correctly.
A
Ashley OwenAug 16, 2025
What to do if my Bluetooth device won't connect to my Bose L1 Pro16 Speaker System?
- K
  Kristen StoneAug 16, 2025
  If your Bluetooth device isn't connecting to your Bose Speaker System, ensure the passcode is correct if required. Verify Bluetooth is enabled on your device and that it's within range of the L1 Pro. Try turning off other nearby Bluetooth devices or disabling their Bluetooth functionality. You can also clear the speaker's memory by pressing and holding the Bluetooth Pair Button for ten seconds, then delete the L1 Pro from your device's Bluetooth memory and re-pair. Power cycling the speaker may also help.
R
Robert ShawAug 19, 2025
How to stop microphone feedback on Bose L1 Pro16 Speaker System?
- B
  Brianna BrownAug 19, 2025
  To reduce microphone feedback on your Bose Speaker System, start by turning down the channel volume. Adjust the microphone's position so it's not pointing directly at the L1 Pro. Try using a different microphone or repositioning the L1 Pro and/or the vocalist on stage. Increasing the distance between the L1 Pro and the microphone can also help. If you're using a vocal effects processor, ensure it's not contributing to the feedback.
D
Daniel BoydAug 23, 2025
What to do if my instrument sounds distorted on my Bose L1 Pro16?
- A
  andrehebertAug 23, 2025
  If your instrument or audio source sounds distorted through your Bose Speaker System, try turning down the volume on the source and the channel volume. You might also want to test with a different source or instrument to see if the issue persists.
B
Benjamin PierceAug 27, 2025
How to troubleshoot no power on a Bose L1 Pro16 Speaker System?
- C
  Cory NavarroAug 27, 2025
  To troubleshoot a lack of power in your Bose Speaker System, ensure that the AC outlet is providing power. Test the outlet by plugging in a lamp or another device, or use an AC outlet tester.
J
Janice SmithAug 30, 2025
What does it mean when the standby LED is flashing red on my Bose L1 Pro16 Speaker System?
- C
  Calvin CortezAug 31, 2025
  A flashing red standby LED on your Bose Speaker System indicates a thermal fault. To resolve this, turn off the L1 Pro and wait 30 minutes before turning it back on. Also, move the L1 Pro to a cooler location with better ventilation.
K
kristinperezSep 3, 2025
Why is my Bose Speaker System humming with nothing plugged in?
- T
  Timothy LewisSep 4, 2025
  If you hear a hum or buzz from your Bose Speaker System when nothing is plugged in, use an AC outlet tester to check the AC outlet for reversed or open (hot, neutral, and/or ground) contacts. If you're using an extension cord, try plugging the L1 Pro directly into the outlet.
E
Edwin LittleSep 7, 2025
How to reduce hum when daisy-chaining Bose L1 Pro16 Speaker System units?
- J
  Jennifer GrantSep 7, 2025
  To reduce excessive hum when daisy-chaining multiple Bose Speaker System units, ensure that the volume on the daisy-chained unit(s) is not set too high.

Bose L1 Pro16 Specifications

General

Amplifier class	D
Frequency range	- Hz
RMS rated power	1250 W
Subwoofer peak power	1000 W
Sound pressure level (max)	124 dB
Amplifier	Built-in
Speaker type	-
Number of drivers	16
Built-in subwoofer	Yes
Subwoofer driver diameter (imperial)	18 \
Type	Freestanding Public Address (PA) system
Mounting type	Floor
Product color	Black
Volume control	Rotary
Number of mixer channels	3 channels
Connectivity technology	Wired & Wireless
6.35 mm (1⁄4-inch) input	1
Power source type	AC