Bose L1 Pro32 User Manual

12 • English L1 Pro32 Portable Line Array • Owner's Guide
PRO.BOSE.COM
Setup
Setup Scenarios
The L1 Pro32 can be placed on the floor or on an elevated stage (see Assembling the Power
Stand and Array on page 7).
WARNING: Do not place the equipment in an unstable location. The equipment could
become unstable leading to a hazardous condition, which could result in injury.
CAUTION: The power stand should not be placed anywhere that may block the
ventilation holes at the rear/bottom of the L1 Pro32. Operating directly on sand or grass
could cause debris to enter the product through vent openings and result in the L1 Pro32
not functioning properly.
L1 Pro32
All of the following setup scenarios require at least one Sub1 or Sub2 bass module. For proper Sub1/Sub2
settings, see the Sub1/Sub2 owner's guide at PRO.BOSE.COM.
Musician (with Sub)
MUTE MUTE
INST INST

Bose L1 Pro32 Specifications

General

Coverage Pattern	180° H x 0° V
Bluetooth	Yes
Battery Life	Not applicable
Type	Portable Line Array System
Maximum SPL	126dB
System Power	2000W peak
Inputs	2 x XLR-1/4" combo
Outputs	XLR line output