Bose L1 Pro32 Service Manual

42 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

©2021 Bose Corporation

Service Manual

Reference Number 840921-SM

REV 02

L1 Pro32

Portable Line Array

Table of Contents

Other manuals for Bose L1 Pro32

Owner's Guide24 pages

Firmware Update4 pages

Questions and Answers:

C
Christopher PatelJul 25, 2025
How to fix no sound on Bose Speaker System?
- A
  adicksonJul 25, 2025
  If you're not getting any sound from your Bose L1 Pro Speaker System, here are a few things to check: * First, ensure that your L1 Pro is powered on. * Verify that your instrument is correctly plugged into the Channel Input. * Confirm that the volume is turned up, both on your audio source and on the L1 Pro itself. * Also, ensure that the L1 Pro isn't in AutoOff/Low-power Standby mode and that the Channel Mute button is not engaged. * To rule out issues with your instrument, try plugging it into a different amplifier to ensure it's working correctly.
W
William ThomasJul 30, 2025
Why is my Bose Speaker System humming with nothing plugged in?
- V
  Virginia GilmoreJul 30, 2025
  If you hear a hum or buzz from your Bose L1 Pro when nothing is plugged in, use an AC outlet tester to check the AC outlet for reversed or open (hot, neutral, and/or ground) contacts. If you're using an extension cord, try plugging the L1 Pro directly into the outlet.
K
Kurt FerrellAug 5, 2025
Why won't my Bluetooth device connect to my Bose L1 Pro32?
- N
  Nicole RodriguezAug 5, 2025
  If your Bluetooth device isn't connecting to your Bose L1 Pro loudspeaker, consider these steps: 1. If a passcode is required, verify that you've entered the correct one. 2. Ensure that Bluetooth is enabled on your device. 3. Your device could be out of range, so move it closer to the L1 Pro. 4. Try turning off other nearby Bluetooth devices or disabling their Bluetooth functionality. 5. Clear the loudspeaker's memory by pressing and holding the Bluetooth Pair Button for ten seconds, and then delete the L1 Pro from your device's Bluetooth memory. Pair the Bluetooth device with the L1 Pro again. 6. Power cycle the L1 Pro by turning it off and then back on before attempting to re-pair your device.
S
Sarah Carey DDSAug 9, 2025
How to stop my Bose Speaker System from distorting sound?
- L
  Lori Mosley MDAug 9, 2025
  If your instrument or audio source sounds distorted through your Bose L1 Pro, try the following: * Reduce the volume on the source. * Lower the channel volume. * Try using a different audio source or instrument to see if the issue persists.
R
Rebecca NelsonAug 14, 2025
How to reduce microphone feedback on Bose Speaker System?

Bose L1 Pro32 Specifications

General

Coverage Pattern	180° H x 0° V
Bluetooth	Yes
Battery Life	Not applicable
Type	Portable Line Array System
Maximum SPL	126dB
System Power	2000W peak
Inputs	2 x XLR-1/4" combo
Outputs	XLR line output

Related product manuals

Bose L1 PRO32 SUB2

Preview: Bose L1 Pro8

Preview: Bose L1 Pro16

Preview: Bose L1 Model II

Bose L1 Model II

Preview: Bose L1 Pro Series

Bose L1 Pro Series

Preview: Bose LIFESTYLE RoomMate

Bose LIFESTYLE RoomMate

Preview: Bose Lifestyle Homewide

Bose Lifestyle Homewide

Preview: Bose PANARAY LT II Series

Bose PANARAY LT II Series

Preview: Lifestyle Surround Sound Speaker System

Lifestyle Surround Sound Speaker System

Preview: Bose Speakers

Preview: Bose COMPANION 2

Bose COMPANION 2

Preview: Bose CineMate GS Series II

Bose CineMate GS Series II