EasyManua.ls Logo

Bose Personalized Amplification System - Technical Information; Mechanical; Electrical; Audio Input;Output

Bose Personalized Amplification System
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
English Deutsch FrançaisDansk Español Italiano SvenskaNederlandsDansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Technical Information
Mechanical
Dimensions
• PS1 power stand: 26.0W x 26.0D x 5.0H (66 cm x 66 cm x 12.7 cm)
• L1 Cylindrical Radiator™ loudspeaker (each section):
3.5W x 4.0D x 43.0H (8.9 cm x 10.5 cm x 109.2 cm)
• R1 remote control: 2.8W x 5.6D x 1.6H (7.1 cm x 14.1 cm x 4.0 cm)
• B1 bass module (optional):
10.3W x 18.0D x 15.3H (25.0 cm x 45.7 cm x 38.0 cm)
Weight
• PS1 power stand: 35 OE (16 kg)
• Lower L1 Cylindrical Radiator™ loudspeaker: 16.0 OE (7 kg)
• Upper L1 Cylindrical Radiator™ loudspeaker: 14.5 OE (6 kg)
• R1 remote control: 0.6 OE (0.27 kg)
• B1 bass module (optional): 28 OE(13 kg)
Electrical
Impedance
• L1 Cylindrical Radiator™ loudspeaker: 4:
• B1 bass module (optional): 8:
AC power rating
• USA/Canada: 100-127V 50/60Hz 1400W
• Peak inrush current: 32A @ 120V
60Hz
Audio Input/Output
• Amplifier 1 output power (Amp 1 OUT): 250W (rms, into 4:), assigned to
upper L1 Cylindrical Radiator™ loudspeaker or the Amp 1 OUT connector
• Amplifier 2 output power: 250W (rms, into 4
:), assigned to
lower L1 Cylindrical Radiator™ loudspeaker or the Amp 2 OUT connector
• Amplifier 3 output power: 250W (rms, into 4
:), assigned to one or two B1 bass
modules using the B1 Bass Module (Amp 3 OUT) connector
• Output level, Line OUT: Balanced XLR connection, +4dBu
• Output level, Bass–Line OUT:
• With a balanced TRS connection: -4dBu (nominal), +9dBu (max)
• With an unbalanced TS connection: -10dBu (nominal), +3dBu (max)
• Bass–Line OUT Frequency Response:
• With 1 or 2 B1 bass modules connected to B1 Bass Module (Amp 3 OUT): 40 -180Hz,
compensated for B1 bass module
• Without B1 bass modules connected to B1 Bass Module (Amp 3 OUT): 40 -180Hz,
flat bandpass
• Data Output: 48KHz, S/PDIF compatible interface. L=Channel 1 output, R=Channel 2
output.
Bose Personalized Amplification System - Technical Information; Mechanical; Electrical; Audio Input;Output