Bose RoomMatch User Manual

Installation and Safety Guidelines Page 5
pro.Bose.com Components
RMPINS Quick Release Pins Kit. Set of 4 Quick-Release Pins designed to replace the
graded M10 fasteners for module-to-module connections. May be used with Room-
Match™ full-range or subwoofer modules.
RMSHAD Module Gain Shading Kit. Optional accessory that installs in the input panel
of RoomMatch full-range modules to allow attenuation of the bottom-3 compression
drivers as compared to the top-3 drivers. This allows for more uniform sound pressure
levels for specific module configurations and coverage areas.
RMSFLY is an accessory side-plate rigging kit for the RoomMatch RMS215 subwoofer
module to allow integration of subwoofer modules in RoomMatch arrays. Kit of left and
right pair with fasteners.
The following table lists the dimensions and weights for RoomMatch accessories. For the RMBRKT, RMPINS, RMSFLY, RMXLNG, and
RMXSRT parts, the dimensions are per piece. Weights listed are the total weights for all pieces included in the accessory kit:
Figure 4. RoomMatch™ Rigging Accessories Dimensions and Weights
Rigging Accessories Dimensions and Weights
Part
Name
Dimensions Net
Weight
Inches mm
Height Width Depth Height Width Depth lb kg
RMAFSM 5.7 38.0 27.8 146 966 655 122 55.3
RMAFLG 8.0 38.0 27.8 203 966 655 148 67.1
RMBRKT 8.7 5.3 5.1 222 134 129 15 6.8
RMPINS 0.9 0.9 2.2 22 22 56 1 0.5
RMPULL 3.1 38.1 16.8 80 967 426 26 11.8
RMSFLY 19.8 11.7 2.0 503 296 50 36 16.3
RMSHAD 3.1 4.8 1.7 78 123 42 2 0.9
RMXLNG 7.8 3.4 48.5 198 86 1231 88 40.0
RMXSRT 7.8 3.4 34.7 198 86 881 70 31.8

Bose RoomMatch Specifications

General

Brand	Bose
Model	RoomMatch
Category	Speaker System
Language	English