32
|
ENG
CONNECT BOSE PRODUCTS
Connect a Bose bass module using an audio cable
You can connect the bass module to the soundbar using a 3.5 mm audio cable
(not provided).
If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile
devices), visit
support.Bose.com/SB550Csupport.Bose.com/SB550C to purchase a 15 ft (4.5 m) cable. You can
also purchase this part at your local electronics store.
1. Connect one end of a 3.5 mm audio cable to the BASS IN connector on the
bass module.
2. Connect the other end of the cable to the BASS connector on the back of
the soundbar.
BASS HDMI (eARC)OPTICAL INIR SERVICEPOWER
BASS HDMI (eARC)OPTICAL INIR SERVICEPOWER
Bose Bass Module 500 Bose Bass Module 700
3. Check for sound (see page 48).
To Next Page
Loading...
