Bose SoundDock 10 Owner's Guide

6
THE SOUNDDOCK
®
10 DIGITAL MUSIC SYSTEM
EnglishTAB 6, 14TAB 8, 16 TAB 7, 15 TAB 3, 11TAB 5, 13 TAB 2, 10TAB 4, 12
Changing the dock adapter
The SoundDock 10 digital music system comes with a
pre-installed universal dock adapter, which
accommodates most iPod models.
If you prefer to use the dock adapter included with your
iPod:
1. Make sure the power cord is disconnected.
2. Lift up the back edge of the adapter and remove it
from the dock.
You may need to insert a thin, non-metallic utensil
into the slot to provide the required leverage to lift the
back edge.
Care and maintenance
Periodic maintaining may include cleaning your product
and replacing the remote control batteries.
Cleaning
To clean the exterior surface of your product, you can
wipe it using a soft, dry cloth. You can also lightly
vacuum the grille.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any
openings.
Replacing the remote control batteries
When the remote stops operating or its range seems
reduced, it is time to change the remote battery.
1. Using a coin, turn the battery cover slightly counter-
clockwise.

Bose SoundDock 10 Specifications

General

Frequency range	- Hz
RMS rated power	- W
Audio output channels	- channels
Bluetooth	Yes
Composite video out	1
Headphone connectivity	-
FM radio	No
Apple docking compatibility	iPhone, iPod
Dimensions (WxDxH)	432 x 244 x 221 mm
Cables included	AC
Product color	Silver

Weight and Dimensions

Weight	8400 g