Troubleshooting
The troubleshooting table below should help solve operating problems with your SoundDock® system. However, before proceeding
to
the troubleshooting table,
do
the following:
• Remove your iPod from the
dock
and
check
for obstructions on
the
connectors
in
the
dock
and on your iPod. Then firmly reseat it
in
the dock.
• Make sure you have the latest version
of
software on your iPod.
, .
Problem What
10
do
No sound
Your iPod does not
navigate playlists using
the remote
• Make sure the system
is
plugged
in,
your iPod
or
other audio device
is
turned on, and audio
is
playing.
• Press the Play/Pause button on the remote control.
• Increase the volume on the iPod.
• Increase the volume on the audio device connected
to
AUDIO
INPUT.
• Increase the volume on the SoundDocksystem.
• Remove your iPod from the dock, wait five seconds, then firmly reseat the iPod in the dock.
• Unplug the power cord for one minute, then plug it back
in.
This resets the system (you should hear a
tone when the system
is
powered back
on).
• Make sure there are no empty playlists on your iPod.
7
To Next Page
Loading...
Need help?
General
Weight and Dimensions
