14 – English
CARE AND MAINTENANCE
Replacing the remote battery
When the remote stops operating or its range seems reduced, it is time to change the
remote battery.
WARNING: Keep the remote control battery away from children. It may cause a fire or
chemical burn if mishandled. Do not recharge, disassemble, heat above 100ºC (212ºF), or
incinerate. Dispose of used batteries promptly. Replace only with a battery of the correct
type and model number.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with an
agency-approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery.
1. Using a coin, turn the battery cover slightly counterclockwise.
2. Remove the cover and insert the new battery (CR2032 or DL2032) flat side up, with
the + symbol in view.
3. Reseat the cover and turn it clockwise to lock into place.
To Next Page
Loading...
