Bose SoundLink Air User Manual

8 – English
GETTING STARTED
System setup
The SoundLink
®
Air system requires a connection to your Wi-Fi
®
network to receive
AirPlay streamed audio. The following steps guide you through the preferred method for
setting up your system.
Note: For another setup method, see “Alternate setup method” on page 15.
What you need:
1. Open a browser on your computer and go to http://www.Bose.com/wifisetup.
• For convenience, the URL is written on the product label located on the bottom of
the system.
• Make sure the SoundLink Air is connected to power before you continue.
2. Follow the online instructions to download and run the Wi-Fi Setup Application.
Note: After starting the setup application, you may be asked to install a software driver. Make sure you
do this before connecting the SoundLink Air system to your computer.
Note: Do not remove power from the SoundLink Air system while downloading and running the Wi-Fi
setup application.
3. When prompted by the following image, connect the system to your computer using
the supplied USB cable.
Remote control
USB cable

Bose SoundLink Air Specifications

General

Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
Product color	Black
LED indicators	Yes
Recommended usage	Other
Frequency range	- Hz
RMS rated power	- W
AC adapter output voltage	20 V
Connectivity technology	Wireless
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
AC adapter output current	2 A
Cables included	USB

Weight and Dimensions

Depth	103 mm
Width	307 mm
Height	171 mm
Weight	2100 g