Name: Bose SoundLink Colour
Brand: Bose
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Operation

English - 13

System status indicators

The system status indicators are located on the top of the speaker, above the

corresponding buttons.

Battery indicator (while speaker is operating on battery power)

Green: High charge

Amber: Medium charge

Red blinking: Low charge/Charge now

See “Operating on battery power” on page 14 for more information.

Bluetooth indicator

Blue blinking: Ready to pair

White blinking: Connecting

White solid: Connected

AUX indicator

White solid: AUX is the selected source

Connecting an AUX device

You can use your speaker with any device that features headphone or audio

output, such as a portable digital music player. This feature requires using a stereo

audio cable with a 3.5 mm plug on each end to connect the audio output of your

device to the AUX input on the speaker. This type of cable is available for purchase

at electronics stores.

To connect an AUX device:

1. Connect the audio cable to the AUX IN connector on the back of the speaker

and to the headphone or audio output connector on the device.

2. Turn on the speaker.

3. Press

to select the AUX source.

4. Adjust the volume on the connected device to near maximum, then use the

speaker volume buttons to adjust the volume level.

Questions and Answers:

Need help?

Do you have a question about the Bose SoundLink Colour and is the answer not in the manual?

Bose SoundLink Colour Specifications

General