25
|
ENG
BATTERY
CHARGE YOUR DEVICE
CAUTION: Do not aempt to charge your device while the speaker is wet. Doing so
may cause damage to the speaker. The speaker is waterproof, but the
USB-C port must be fully dried out before charging. If moisture is
detected, the Power light slowly blinks white and amber (see page 26).
1. Connect one end of the USB-C cable to the USB-C port on the back of
the speaker.
2. Connect the other end of the cable to the USB-C port on your device.
Charging status displays on your device.
To Next Page
Loading...
