39
|
ENG
TROUBLESHOOTING
RESET THE SPEAKER
If the speaker is unresponsive, you can reset it.
Reseing the speaker resets the product controls and reboots the speaker. It doesn’t
clear any device seings.
NOTE: Make sure the USB-C cable isn’t connected to the speaker.
1. Press and hold the Power buon I for up to 30 seconds until the speaker
powers o.
2. Press the Power buon I.
The Power light glows according to the baery level (see page 26).
NOTES:
• If the USB-C cable is connected, you must remove it before you can reset
the speaker.
• If you’re unable to resolve your issue, additional troubleshooting and support is
available at: support.Bose.com/sl-maxsupport.Bose.com/sl-max