Bose SoundLink Mini Bluetooth Speaker - AUX Connector Setup Steps

Operation
English - 19
To use the AUX connector:
1.
Plug the cable from the audio device into the
(AUX) connector on the side of the Bose
®
SoundLink
®
Mini speaker.
2. Press Power on the Bose
®
SoundLink
®
Mini
speaker.
3. Press AUX on the Bose
®
SoundLink
®
Mini speaker.
4.
Adjust the volume on the connected device to near
maximum, then use the Bose
®
SoundLink
®
Mini
speaker volume buttons to adjust the volume level.
Note: If a connected device stops playing audio for 30
minutes, the speaker automatically turns off to conserve
battery power.
Note:The connector on the bottom of the speaker
is for service only and does not play audio from any
connected
device.