12 - ENGLISH
CHARGING THE BATTERY
Connecting the USB cable
CAUTION: Use this product only with an agency approved power supply which meets
local regulatory requirements (e.g., UL, CSA, VDE, CCC).
1. Open the hinged door on the bottom of the right earbud.
2. Plug the small end of the USB cable into the USB connector.
3. Plug the other end into a USB wall charger or computer that is powered on.
• While charging, the battery indicator blinks amber.
• When the battery is fully charged, the battery indicator glows green.
• Allow up to two hours to fully charge the battery. A full charge powers the
headphones for up to six hours.
• The headphones will not play while charging.
Note: Before charging, be sure the headphones are at room temperature, between
41° F (5° C) and 104° F (40° C).
To Next Page
Loading...
