27
DISASSEMBLY PROCEDURE
5. Main/ Carrier PCB Removal
5.1 Complete step 1.
5.2 Figure 19. Remove the 6 screws securing
the rear panel.
5.3 Figure 20. Insert the spudger into the
screw cavity and press forward toward the
rear panel at each of the 4 corners of the
cabinet. This will release the rear panel from
the cabinet.
5.4 Figure 21. Once rear panel is released,
the main PCB will be exposed.
Figure 19. Cabinet, Screws
Figure 20. Rear Panel, Removal
Figure 21. Cabinet, Side
To Next Page
Loading...
