46
BACK DOOR KEY PRESSES
1. Factory Default
1.1 Press and hold the Volume minus and
Preset 1 button. The system will return to fac-
tory default settings and reboot.
2. Software Update
2.1 Press and hold the Volume minus and
Preset 4 button to initiate a software update.
2.2 The unit will download software from an
update over Wi-Fi.
2.3 While applying power and holding the
Volume minus and Preset 4 button, the unit
will load software from a thumb-drive inserted
in its USB port.
3. Information for PTS
3.1 Press and hold the Volume minus and
Preset 5 button to initiate.
4. Setup AP
4.1 Press and hold the Volume minus and
Preset 2 button to initiate.
5. Wi-Fi ON/OFF Toggle
5.1 Press and hold the Volume minus and
Preset 3 button to initiate.
6. Restart
6.1 Press and hold the on button for 15 sec-
ond to initiate.
7. Network Standby or low power standby.
7.1 Press the on button to initiate this 2
modes.
To Next Page
Loading...
